Monthly Archives: August 2015

DC2N5 reference bars are now in too!

Blue reference bars, available in most of my PC software for TAP content visualization and in DC2N3 upon request, are now available in DC2N5 too ­čÖé

Posted in Retrocomputing, Technical | Tagged , , , , , , | 2 Comments

DC2N5 preserving Silkworm from Tape to SD Card

I figured out I had never uploaded a video about DC2N5 sampling tapes, so here is one ­čÖé

Posted in Retrocomputing, Technical | Tagged , , , , , , | Leave a comment

ILI9341 display driver for STM32F100 fixed

Adding a dummy register read before changing┬áthe D/C signal fixed the issue I was having earlier. That proves that logic analysers shorten troubleshooting time dramatically: I’d have been blind without one ­čÖé The STM32F100’s SPI status register seems to behave … Continue reading

Posted in Technical | Tagged , , | 2 Comments

Troubleshooting my display driver port for STM32F100

After porting my display driver for the Discovery board based on STM32F100, I noticed that something is not quite right. The ILI9341 display┬áseems to constantly miss the second command of the couple Column Address Set (0x2A)┬áand Page Address Set (0x2B), … Continue reading

Posted in Technical | Tagged , , | Leave a comment

Developing DC2N5 for the STM32F100 Discovery too

Today after work I decided to get going with the STM32 Discovery board that I had bought a while back but never used. It’s a cheap board but it’s┬ánot quite friendly when it comes to inserting it into a breadboard. … Continue reading

Posted in Technical | Tagged , , , | Leave a comment